| Capacities | Metric | |||
|---|---|---|---|---|
| Working height | h21 | 20.28 m | ||
| Platform height | h7 | 18.28 m | ||
| Max. outreach | l4 | 12 m | ||
| Overhang | l5 | 8 m | ||
| Pendular arm rotation (top / bottom) | +69 ° / -66 ° | |||
| Platform capacity | Q | 230 kg | ||
| Turret rotation | 355 ° | |||
| Platform rotation (right / left) | 90 ° / 90 ° | |||
| Number of people (inside / outside) | 2 / 2 |
| Weight and dimensions | ||||
|---|---|---|---|---|
| Platform weight* | 10050 kg | |||
| Platform dimensions (length x width) | lp / ep | 2.1 m x 0.8 m | ||
| Overall width | b1 | 2.4 m | ||
| Overall length | l1 | 8.42 m | ||
| Overall height | h17 | 2.71 m | ||
| Overall length (stowed) | l9 | 6.21 m | ||
| Overall height (stowed) | h18 | 2.85 m | ||
| Floor height (access) | h20 | 0.4 m | ||
| Counterweight offset (turret at 90°) | a7 | 0.11 m | ||
| Internal turning radius (over tyres) | b13 | 1.53 m | ||
| External turning radius | Wa3 | 4.17 m | ||
| Ground clearance at centre of wheelbase | m2 | 0.44 m | ||
| Wheelbase | y | 2.4 m |
| Performances | ||||
|---|---|---|---|---|
| Drive speed - stowed | 4.7 km/h | |||
| Drive speed - raised | 0.8 km/h | |||
| Gradeability | 40 % | |||
| Permissible leveling | 5 ° |
| Wheels | ||||
|---|---|---|---|---|
| Tyres type | Solid Tyres Cured-On | |||
| Dimensions of front wheels / rear wheels | 1025 x 365 mm - 1025 x 365 mm | |||
| Drive wheels (front / rear) | 2 / 2 | |||
| Steering wheels (front / rear) | 2 / 2 | |||
| Braking wheels (front / rear) | 0 / 2 |
| Engine/Battery | ||||
|---|---|---|---|---|
| Engine brand / model / norm | Yanmar - 3TNV88C - Stage 5 | |||
| I.C. Engine power rating / Power (kW) | 34 Hp / 25.5 kW |
| Miscellaneous | ||||
|---|---|---|---|---|
| Ground Pressure | 20.65 daN/cm² | |||
| Hydraulic Pressure | 335 Bar | |||
| Hydraulic tank capacity | 80 l | |||
| Fuel tank | 78 l |
| Standards compliance | ||||
|---|---|---|---|---|
| This machine is in compliance with: | European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage) |
*Varies according to options and standards of the country to which the machine is delivered
Load chart
Load Chart metric
Dimensional drawing
Equipment
| Standard |
|---|
| 230V Predisposition |
| 4 simultaneous movements |
| 4 wheel drive |
| 4 wheel steer with crab mode |
| Audible alarm and illuminated indicator lamp (leveling, overload, lowering) |
| Backup electrical pump |
| CAN bus technology |
| Dead man pedal |
| Differential locking on rear axle |
| Easy Manager |
| Emergency stop button in platform and on frame |
| Engine with DPF |
| Front axle with limited slip |
| Fuel gauge with low level indicator |
| Galvanized basket 2,100 mm |
| Hour meter |
| LED rotating beacon |
| Large color screen on turret |
| Management via engine speed bearing |
| Oscillating front axle |
| Proportional controls |
| Stop & Go system |
| Optional |
|---|
| 110 or 230V plug with differential circuit breaker |
| Access control keypad for easy link |
| Air predisposition |
| Battery cut-off |
| Beep on every movement |
| Beep upon travel |
| Biodegradable oil |
| Coded anti-start |
| Continuous turret rotation |
| Easy link with remote lock |
| Extreme cold oil |
| Fuel tank locking cap |
| Galvanized basket 2,100 mm |
| Galvanized basket 2.100 mm with lateral door |
| Highly capacity battery |
| Oil tank locking cap |
| Onboard generator (3,5 or 5 kW) |
| SPS : Secondary protection system |
| Safety kit (Harness + helmet) |
| Screen protection on the lower box control |
| Socket 230 V + differential circuit breaker |
| Spark arrester |
| Turret cover with key lock |
| Water heater |
| Working light |
