| Capacities | Metric | |||
|---|---|---|---|---|
| Max. capacity | Q | 4999 kg | ||
| Max. lifting height | h3 | 20.9 m | ||
| Max. Reach | l4 | 17.9 m |
| Weight and dimensions | ||||
|---|---|---|---|---|
| Overall width | b1 | 2.49 m | ||
| Overall height | h17 | 3.05 m | ||
| Overall cab width | b4 | 0.99 m | ||
| Outer frame turning radius | Wa3 | 5.23 m | ||
| Ground clearance | m4 | 0.35 m | ||
| Wheelbase | y | 3.05 m | ||
| Frame levelling longitudinal +/- (Degree) | 3 | |||
| Tilt-up angle | a4 | 12 ° | ||
| Tilt-down angle | a5 | 105 ° | ||
| Turret rotation | 360 ° | |||
| Overall weight | 17930 kg | |||
| Forks length / width / section | l / e / s | 1200 mm x 50 mm x 15 mm |
| Wheels | ||||
|---|---|---|---|---|
| Standard tyres | Michelin - XZY3 - 445/65 R22.5 | |||
| Drive wheels (front / rear) | 2 / 2 |
| Stabilisers | ||||
|---|---|---|---|---|
| Stabs Type | Telescopic Duplex | |||
| Controls with stabs | Stabs Commands Individual or Simultaneous |
| Engine | ||||
|---|---|---|---|---|
| Engine brand | Mercedes | |||
| Engine norm | Stage 3A | |||
| Engine model | OM904LA.E3A/2 | |||
| I.C. Engine power rating / Power (kW) | 150 Hp / 110 kW | |||
| Max. torque / Engine rotation | 580 Nm/m @ 1200 tr/min | |||
| Number of cylinders - Capacity of cylinders | 3400 - 4400 cm³ | |||
| Injection | engine Injection direct | |||
| Engine cooling system | Water | |||
| Drawbar pull (Laden) | 8700 daN | |||
| Number of batteries | 2 | |||
| Battery / Batteries capacity | 12 V / 120 Ah |
| Transmission | ||||
|---|---|---|---|---|
| Transmission type | Hydrostatic | |||
| Number of gears (forward / reverse) | 2 / 2 | |||
| Max. travel speed (may vary according to applicable regulations) | 40 km/h | |||
| Parking brake | Automatic Negative Hand-brake | |||
| Service brake | Hydraulic |
| Hydraulics | ||||
|---|---|---|---|---|
| Hydraulic pump type | Gear pump | |||
| Hydraulic flow | 115 l/min | |||
| Hydraulic Pressure | 270 Bar |
| Tank capacities | ||||
|---|---|---|---|---|
| Hydraulic oil | 225 l | |||
| Fuel tank | 305 l |
| Noise and vibration | ||||
|---|---|---|---|---|
| Noise at driving position (LpA) | 79 dB(A) | |||
| Noise to environment (LwA) | 107 dB(A) | |||
| Vibration to whole hand/arm | < 2.50 m/s² |
| Miscellaneous | ||||
|---|---|---|---|---|
| Steering wheels (front / rear) | 2 / 2 | |||
| Controls | 2 Joysticks | |||
| Safety cab homologation | Cab ROPS - FOPS Level 2 | |||
| Attachment recognition system (E-Reco) | Standard |
Dimensional drawing
| Other data | Metric | |||
|---|---|---|---|---|
| Overall length (with forks) | l1 | 6.87 m | ||
| Length to face of forks | l2 | 6.87 m | ||
| Length of frame | l14 | 5.35 m | ||
| Wheelbase | y | 3.05 m | ||
| Ground clearance | m4 | 0.35 m | ||
| Counterweight offset (turret at 90°) | a7 | 2.68 m | ||
| Tilt-up angle | a4 | 12 ° | ||
| Tilt-down angle | a5 | 105 ° | ||
| Overall length at stabilisers | l12 | 5.22 m | ||
| Outer frame turning radius | Wa3 | 5.23 m | ||
| Outer turning radius (with forks) | b15 | 5.23 m | ||
| Overall width | b1 | 2.49 m | ||
| Overall width with stabilisers extended | b7 | 5.55 m | ||
| Overall cab width | b4 | 0.99 m | ||
| Overall height | h17 | 3.05 m | ||
| Frame levelling corrector | a9 | 8 ° |
Load chart
Load Chart metric
Machine on tyres with forks Metric
Rotation on lowered stabilisers with 1000 kg platform Metric
Rotation on lowered stabilisers with 1500 kg jib Metric
Machine on tyres with forks Metric
Rotation on lowered stabilisers with 1000 kg platform Metric
Rotation on lowered stabilisers with 1500 kg jib Metric
Rotation on lowered stabilisers with 365 kg platform Metric
Rotation on lowered stabilisers with 3D negative Metric
Rotation on lowered stabilisers with 3D positive Metric
Rotation on lowered stabilisers with forks Metric
Rotation on lowered stabilisers with 3D negative Metric
Rotation on lowered stabilisers with 3D positive Metric
Rotation on lowered stabilisers with forks Metric
Rotation on lowered stabilisers with winch 5000 kg Metric
