Technical characteristics				Metric
1.1		Manufacturer				Manitou
1.2		Model Name				M 50-2 H
1.3		Power source				Diesel
1.4		Operator type				Seated
1.5		Max. capacity		Q		5000 kg
1.6		Load centre of gravity		c		600 mm
1.8		Load distance, centre of drive axle to fork		x		773 mm
1.9		Wheelbase		y		2060 mm

		Weight
2.1		Service weight				8275 kg
2.2		Weight on front axle (laden) / rear axle (laden)				11615 kg / 1660 kg
2.3		Weight on front axle (Unladen) / rear axle (Unladen)				3285 kg / 4990 kg

		Wheels
3.1		Tyres type				Foam Filled Non Marking
3.2		Dimensions of front wheels				18-19,5 18PR A224
3.3		Dimensions of rear wheels				10R17,5 G291 GY
3.5		Number of front wheels / rear wheels				2 / 2
3.5.2		Number of drive wheels				2
3.6		Front wheel gauge		b10		1600 mm
3.7		Rear wheel gauge		b11		1640 mm

		Dimensions
4.1		Tilt of Mast Forward (deg) / Backward (deg)		α / β		15 / 15
4.7		Height of overhead guard (cabin)		h6		2460 mm
4.8		Seat height/stand height		h7		1380 mm
4.12		Height of towing bar (coupling height)		h10		690 mm
4.19		Overall length		l1		4948 m
4.20		Length to face of forks		l2		3748 mm
4.21		Overall width		b1		2057 mm
4.21		Overall width - Single wheels		b1		2057 mm
4.22		Forks section / width / length		s / e / l		60 mm x 150 mm / 1200 mm
4.24		Fork carriage width		b3		1670 mm
4.31		Ground clearance below mast		m1		250 mm
4.32		Ground clearance at centre of wheelbase		m2		310 mm
4.34		Aisle width for 800 x 1200 pallet lengthways		Ast		5640 mm
4.35		Turning radius		Wa		3465 m
4.36		Internal turning radius (over tyres)		b13		200 mm

		Performances
5.1		Travel speed (laden / unladen)				10 km/h / 24 km/h
5.2		Lifting speed (laden / unladen)				0.4 m/s / 0.4 m/s
5.3		Lowering speed (laden / unladen)				0.4 m/s / 0.3 m/s
5.5		Drawbar pull (Laden)				7410 daN
5.10		Service brake				Hydraulic

		Engine
7.1		Engine brand / model				Perkins / 854F-E34T WF
7.2		Engine power according to ISO 1585				55 kW
7.3		Rated speed				2200 rpm
7.4		Number of cylinders				4
7.5		Fuel consumption according to VDI cycle				6.9 l/h

		Miscellaneous
8.2		Working hydraulic pressure for attachments				230 Bar
8.3		Oil flow rate for attachments				97 l/min
8.4		Measured/guaranteed mean noise level at the ear of the operator				< 76 dB(A)