Rotating Telehandlers

MRT 2150 Privilege Plus

MRT 2150 Privilege Plus

MRT 2150 PRIVILEGE PLUS

Technical sheet :

MRT 2150 PRIVILEGE PLUS

MRT 2150 Privilege Plus
Manitou - handling your world
Capacities Metric
Max. capacity Q 4999 kg
Max. lifting height h3 20.9 m
Max. Reach l4 17.9 m
Weight and dimensions
Ground clearance center m4 0.35 m
Wheelbase y 3.05 m
Length to face of forks l2 6.87 m
Length of frame l14 5.35 m
Overall length (with forks) l1 6.87 m
Overall width b1 2.49 m
Overall width with stabilisers extended b7 5.55 m
Overall height h17 3.05 m
Overall cab width b4 0.99 m
Tilt-down angle a5 105 °
Tilt-up angle a4 12 °
Forks length / width / section l / e / s 1200 mm x 50 mm x 15 mm
Turret rotation 360 °
Outer frame turning radius Wa3 5.23 m
Internal turning radius (over tyres) b13 1.7 m
Overall weight 17930 kg
Wheels
Tyres type Pneumatic
Steering wheels (front / rear) 2 / 2
Drive wheels (front / rear) 2 / 2
Stabilisers
Stabs Type Telescopic Duplex
Controls with stabs Stabs Commands Individual or Simultaneous
Engine
Engine brand Mercedes
Engine norm Stage IV / Tier 4 Final
Engine model OM 934 E4-5
I.C. Engine power rating / Power (kW) 156 Hp / 115 kW
Max. torque / Engine rotation 675 Nm @ 1500 tr/min
Number of cylinders - Capacity of cylinders 4 - 5130 cm³
Injection engine Injection direct
Engine cooling system Water
Number of batteries 2
Battery / Batteries capacity 12 V / 120 Ah
Drawbar pull (Laden) 8700 daN
Transmission
Transmission type Hydrostatic
Number of gears (forward / reverse) 2 / 2
Max. travel speed (may vary according to applicable regulations) 40 km/h
Parking brake Automatic Negative Hand-brake
Service brake Hydraulic
Hydraulics
Hydraulic pump type Gear Pump
Hydraulic flow 115 l/min
Hydraulic Pressure 275 Bar
Tank capacities
Hydraulic oil 225 l
Fuel tank 305 l
Diesel Exhaust fluid (AdBlue® type) 57 l
Noise and vibration
Noise at driving position (LpA) 79.7 dB(A)
Noise to environment (LwA) 108 dB(A)
Vibration to whole hand/arm < 2.50 m/s²
Miscellaneous
Controls 2 Joysticks
Safety cabin homologation Cab ROPS - FOPS Level 2
Attachment recognition system (E-Reco) Standard

Dimensional drawing

MRT 2150 Privilege Plus MRT 2150 Privilege Plus MRT 2150 Privilege Plus
Other data Metric
Overall length (with forks) l1 6.87 m
Length to face of forks l2 6.87 m
Length of frame l14 5.35 m
Wheelbase y 3.05 m
Ground clearance center m4 0.35 m
Counterweight offset (turret at 90°) a7 2.68 m
Tilt-up angle a4 12 °
Tilt-down angle a5 105 °
Overall length at stabilisers l12 5.22 m
Outer frame turning radius Wa3 5.23 m
Outer turning radius (with forks) b15 5.23 m
Overall width b1 2.49 m
Overall width with stabilisers extended b7 5.55 m
Overall cab width b4 0.99 m
Overall height h17 3.05 m
Frame Levelling Corrector a9 8 °

Load chart

Load Chart metric MRT 2150 Privilege Plus Machine on tyres with forks Metric MRT 2150 Privilege Plus Rotation on lowered stabilisers with 1000 kg platform Metric MRT 2150 Privilege Plus Rotation on lowered stabilisers with 1500 kg jib Metric MRT 2150 Privilege Plus
Rotation on lowered stabilisers with 365 kg platform Metric MRT 2150 Privilege Plus Rotation on lowered stabilisers with 3D negative Metric MRT 2150 Privilege Plus Rotation on lowered stabilisers with 3D positive Metric MRT 2150 Privilege Plus Rotation on lowered stabilisers with forks Metric MRT 2150 Privilege Plus
Rotation on lowered stabilisers with winch 5000 kg Metric MRT 2150 Privilege Plus
MRT 2150 Privilege Plus
Check out our used equipment ads