Rotating Telehandlers

MRT-X 3050 Privilege Plus

MRT-X 3050 Privilege Plus

MRT-X 3050 PRIVILEGE PLUS

Technical sheet :

MRT-X 3050 PRIVILEGE PLUS

MRT-X 3050 Privilege Plus
Manitou - handling your world
Capacities Metric
Max. capacity Q 4999 kg
Max. lifting height h3 29.5 m
Max. Reach l4 25.8 m
Weight and dimensions
Overall width b1 2.49 m
Overall height h17 3.05 m
Overall cab width b4 0.99 m
Ground clearance m4 0.35 m
Wheelbase y 3.25 m
Tilt-up angle a4 12 °
Tilt-down angle a5 108 °
Turret rotation 360 °
Overall weight 21480 kg
Forks length / width / section l / e / s 1200 mm x 50 mm x 15 mm
Wheels
Tyres type Pneumatic
Standard tyres Michelin - XZY3 - 445/65 R22.5
Drive wheels (front / rear) 2 / 2
Stabilisers
Stabs Type Telescopic Duplex
Controls with stabs Stabs Commands Individual or Simultaneous
Engine
Engine brand Mercedes
Engine norm Stage 3A
Engine model OM_904_LA_E3A___Stage_3A
I.C. Engine power rating / Power (kW) 176 Hp / 129 kW
Max. torque / Engine rotation 1600 Nm/m @ 1200 tr/min
Number of cylinders - Capacity of cylinders 3400 - 5130 cm³
Injection engine Injection direct
Engine cooling system Water
Drawbar pull (Laden) 9500 daN
Number of batteries 2
Battery / Batteries capacity 12 V / 120 Ah
Transmission
Transmission type Hydrostatic
Number of gears (forward / reverse) 2 / 2
Max. travel speed (may vary according to applicable regulations) 40 km/h
Parking brake Automatic Negative Hand-brake
Service brake Hydraulic
Hydraulics
Hydraulic pump type Variable pump
Hydraulic flow 180 l/min
Hydraulic Pressure 350 Bar
Tank capacities
Engine oil 290 l
Hydraulic oil 290 l
Fuel tank 290 l
Noise and vibration
Noise at driving position (LpA) 79.7 dB(A)
Noise to environment (LwA) 108 dB(A)
Vibration to whole hand/arm < 2.50 m/s²
Miscellaneous
Steering wheels (front / rear) 2 / 2
Controls 2 Joysticks
Safety cab homologation Cab ROPS - FOPS Level 2
Attachment recognition system (E-Reco) Standard

Dimensional drawing

MRT-X 3050 Privilege Plus MRT-X 3050 Privilege Plus MRT-X 3050 Privilege Plus
Other data Metric
Overall length (with forks) l1 7.82 m
Length to face of forks l2 7.82 m
Length of frame l14 5.6 m
Wheelbase y 3.25 m
Ground clearance m4 0.35 m
Tilt-up angle a4 12 °
Tilt-down angle a5 108 °
Outer turning radius (with forks) b15 6.5 m
Overall width b1 2.49 m
Overall width with stabilisers extended b7 6.25 m
Overall cab width b4 0.99 m
Overall height h17 3.05 m
Frame levelling corrector a9 7.4 °

Load chart

Load Chart metric MRT-X 3050 Privilege Plus Machine on tyres with forks Metric MRT-X 3050 Privilege Plus Rotation on lowered stabilisers with 1000 kg platform Metric MRT-X 3050 Privilege Plus Rotation on lowered stabilisers with 1500 kg jib Metric MRT-X 3050 Privilege Plus
Rotation on lowered stabilisers with 365 kg platform Metric MRT-X 3050 Privilege Plus Rotation on lowered stabilisers with forks Metric MRT-X 3050 Privilege Plus Rotation on lowered stabilisers with winch 5000 kg Metric MRT-X 3050 Privilege Plus
MRT-X 3050 Privilege Plus
Check out our used equipment ads