Warehousing

EMA II 18 HL-2

EMA II 18 HL-2

EMA II 18 HL-2

Technical sheet :

EMA II 18 HL-2

EMA II 18 HL-2
Manitou - handling your world
Technical characteristics Metric
1.1 Manufacturer Manitou
1.2 Model Name EMA II 18 HL-2
1.3 Power source Battery
1.4 Operator type Seated
1.5 Max. capacity Q 1750 kg
1.6 Load centre of gravity c 500 mm
1.8 Load distance, centre of drive axle to fork x 308 mm
1.9 Wheelbase y 1745 mm
Weight
2.1 Service Weight 8700 kg
2.2 Weight on front axle (laden) / rear axle (laden) 6330 kg / 4080 kg
2.3 Weight on front axle (Unladen) / rear axle (Unladen) 3480 kg / 5220 kg
Wheels
3.1 Tyres type PPS
3.2 Dimensions of front wheels 412 x 178
3.3 Dimensions of rear wheels 457 x 178
3.5 Number of front wheels / rear wheels 2 / 2
3.2 Number of drive wheels 2
3.6 Front wheel gauge b10 1110 mm
3.7 Rear wheel gauge b11 1350 mm
Dimensions
4.1 Tilt of Mast Forward (deg) / Backward (deg) α / β 1.5 / 4
4.4 Max. lifting height h3 12720 mm
4.7 Height of overhead guard (cabin) h6 2260 mm
4.8 Seat height/stand height h7 1200 mm
4.19 Overall length l1 3740 mm
4.20 Length to face of forks l2 2590 mm
4.21 Overall width b1 860 mm
4.22 Forks section / width / length s / e / l 40 mm x 125 mm x 1150 mm
4.23 Fork carriage ISO 2328 (class/form) A/B 2
4.24 Fork carriage width b3 860 mm
4.31 Ground clearance below mast m1 50 mm
4.32 Ground clearance at centre of wheelbase m2 130 mm
4.33 Aisle width for 1000 x 1200 pallet widthways Ast 2000 mm
4.34 Aisle width for 800 x 1200 pallet lengthways Ast 2200 mm
Performances
5.1 Travel speed (laden / unladen) 9 km/h / 9.5 km/h
5.2 Lifting speed (laden / unladen) 0.35 m/s / 0.45 m/s
5.3 Lowering speed (laden / unladen) 0.4 m/s / 0.36 m/s
5.7 Gradeability - laden / unladen 8 % / 10.5 %
5.9 Service brake Hydraulic
Engine
6.1 Drive motor rating S2 60 min 10 kW
6.2 Lift motor rating at S3 15% 9 kW
6.3 Battery according to DIN 43531/35/36 A, B, C DIN 43595
6.4 Battery / Batteries capacity 48 V - 930 Ah
6.5 Battery weight (+/- 5%) 1300 kg
Miscellaneous
8.1 Type of drive control Mosfet AC speed controller
8.2 Working hydraulic pressure for attachments (bar) 200 Bar
8.3 Oil flow rate for attachments 25 l/min
8.4 Measured/guaranteed mean noise level at the ear of the operator < 73 dB(A)
8.4 Sound level at the driver's ear according to DIN 12 053 73 dB(A)

Dimensional drawing

EMA II 18 HL-2 EMA II 18 HL-2

Characteristics of masts and residual capacities

Free Lift Triplex FLT 8010 FLT 8400 FLT 9000 FLT 9500 FLT 10020 FLT 10200 FLT 11010 FLT 12000 FLT 12510 FLT 12720
h3 - Mast lifting height mm 8010 8400 9000 9500 10020 10200 11010 12000 12510 12720
h2 - Mast free lift mm 2900 3080 3330 3650 3770 3870 4180 4520 4680 4750
h1 - Mast height lowered mm 3720 3900 4150 4270 4590 4690 5000 5340 5550 5570
h4 - Mast height extended mm 8840 9230 9830 10350 10850 11175 11985 13005 13485 13695
β - Mast inclination (rear) ° 4 4 4 4 4 4 4 4 4 4
Residual capacity with integrated side shift (Industrial load chart) kg 1250 1250 1250 1100 1100 1000 850 750 700 500
Residual capacity with integrated sideshift (Maximum height & LC = 600 mm) kg 1250 1250 1250 1100 1100 1000 850 750 700 500
EMA II 18 HL-2
Consultez les occasions Manitou