| Capacities | Metric | |||
|---|---|---|---|---|
| Working height | h21 | 28 m | ||
| Platform height | h7 | 25.75 m | ||
| Max. outreach | l4 | 21.45 m | ||
| Pendular arm rotation (bottom) | +-62 ° | |||
| Platform capacity / capacity (maximum) | Q | 240 kg / 350 kg | ||
| Turret rotation | 360 ° | |||
| Platform rotation (right / left) | 90 ° / 90 ° | |||
| Number of people (inside / outside) | 2 / 3 |
| Weight and dimensions | ||||
|---|---|---|---|---|
| Platform weight* | 16488 kg | |||
| Platform dimensions (length x width) | lp / ep | 2.3 m x 0.9 m | ||
| Overall width | b1 | 2.48 m | ||
| Overall length | l1 | 11.36 m | ||
| Overall height | h17 | 2.73 m | ||
| Overall length (stowed) | l9 | 8.09 m | ||
| Overall height (stowed) | h18 | 2.71 m | ||
| Floor height (access) | h20 | 0.48 m | ||
| Jib length | l13 | 3.8 m | ||
| Counterweight offset (turret at 90°) | a7 | 1.43 m | ||
| Internal turning radius (over tyres) | b13 | 1.97 m | ||
| External turning radius | Wa3 | 4.35 m | ||
| Ground clearance at centre of wheelbase | m2 | 0.41 m | ||
| Wheelbase | y | 2.8 m |
| Performances | ||||
|---|---|---|---|---|
| Drive speed - stowed | 4.5 km/h | |||
| Drive speed - raised | 0.8 km/h | |||
| Gradeability | 37.5 % |
| Wheels | ||||
|---|---|---|---|---|
| Tyres type | Solid Tyres Cured-On | |||
| Drive wheels (front / rear) | 2 / 2 | |||
| Steering wheels (front / rear) | 2 / 2 | |||
| Braking wheels (front / rear) | 2 / 2 |
| Engine/Battery | ||||
|---|---|---|---|---|
| Engine brand / model | Kubota - D1803-CR-TIE4B | |||
| I.C. Engine power rating / Power (kW) | 49.6 Hp / 37 kW |
| Miscellaneous | ||||
|---|---|---|---|---|
| Ground Pressure | 22.25 daN/cm² | |||
| Hydraulic Pressure | 400 Bar | |||
| Hydraulic tank capacity | 94 l | |||
| Fuel tank | 72 l | |||
| Sound level at platform | 0.5 dB(A) | |||
| Vibration on hands/arms | 0 m/s |
| Standards compliance | ||||
|---|---|---|---|---|
| This machine is in compliance with: | European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage) |
Dimensional drawing
Equipment
| Standard |
|---|
| 4 simultaneous movements |
| 4 wheel drive |
| 4 wheel steer with crab mode |
| Audible alarm and illuminated indicator lamp (leveling, overload, lowering) |
| Backup electrical pump |
| Basket 2,300 mm |
| Battery cut-off |
| CAN bus technology |
| Continuous turret rotation |
| Dead man pedal |
| Differential locking on rear axle |
| Electronic platform compensation |
| Emergency stop button in platform and on frame |
| Engine on swivel chair |
| Front axle with limited slip |
| Fuel gauge with low level indicator |
| Horn in the platform |
| Hour meter |
| Lift and drive |
| Oscillating front axle |
| Remote control for transport |
| Telescopic jib |
| Water heater |
| Optional |
|---|
| Air predisposition |
| Beep on every movement |
| Beep upon travel |
| Biodegradable oil |
| Catalytic cleaner |
| Coded anti-start |
| Cold weather kit |
| Initial verification report before putting into service |
| Lockable fuel cap |
| Non-marking tyres |
| Non-marking tyres |
| Onboard generator (3,5 or 5 kW) |
| Onboard generator (5 kW) |
| Personalized paintwork |
| Refinery kit |
| SMS : Safe Man System |
| Safety harness |
| Screen protection on the lower box control |
| Welder ready package |
| Working light |
