Forklift Trucks

M 40-2 H

M 40-2 H

M 40-2 H

Technical sheet :

M 40-2 H

M 40-2 H
Manitou - handling your world
Technical characteristics Metric
1.1 Manufacturer Manitou
1.2 Model Name M 40-2 H
1.3 Power source Diesel
1.4 Operator type Seated
1.5 Max. capacity Q 4000 kg
1.6 Load centre of gravity c 500 mm
1.8 Load distance, centre of drive axle to fork x 763 mm
1.9 Wheelbase y 2060 mm
Weight
2.1 Service weight 6915 kg
2.2 Weight on front axle (laden) / rear axle (laden) 9075 kg / 1840 kg
2.3 Weight on front axle (Unladen) / rear axle (Unladen) 2625 kg / 4290 kg
Wheels
3.1 Tyres type Pneumatic
3.2 Dimensions of front wheels 18x19.5 18PR A224
3.3 Dimensions of rear wheels 10R17.5 G291 GY
3.5 Number of front wheels / rear wheels 2 / 2
3.5.2 Number of drive wheels 2
3.6 Front wheel gauge b10 1600 mm
3.7 Rear wheel gauge b11 1640 mm
Dimensions
4.1 Tilt of Mast Forward (deg) / Backward (deg) α / β 15 / 15
4.7 Height of overhead guard (cabin) h6 2460 mm
4.8 Seat height/stand height h7 1440 mm
4.12 Height of towing bar (coupling height) h10 690 mm
4.19 Overall length l1 4858 mm
4.20 Length to face of forks l2 3658 mm
4.21 Overall width b1 2057 mm
4.21 Overall width - Single wheels b1 2057 mm
4.22 Forks section / width / length s / e / l 50 mm x 150 mm / 1200 mm
4.23 Fork carriage ISO 2328 (class/form) A/B FEM3
4.24 Fork carriage width b3 1670 mm
4.31 Ground clearance below mast m1 250 mm
4.32 Ground clearance at centre of wheelbase m2 310 mm
4.34 Aisle width for 800 x 1200 pallet lengthways Ast 5560 mm
4.35 Turning radius Wa 3395 mm
4.36 Internal turning radius (over tyres) b13 200 mm
Performances
5.1 Travel speed (laden / unladen) 10 km/h / 24 km/h
5.2 Lifting speed (laden / unladen) 0.4 m/s / 0.4 m/s
5.3 Lowering speed (laden / unladen) 0.4 m/s / 0.3 m/s
5.5 Drawbar pull (Laden) 7410 daN
5.10 Service brake Hydraulic
Engine
7.1 Engine brand / model Perkins / 854F-E34T WF
7.2 Engine power according to ISO 1585 55 kW
7.3 Rated speed 2200 rpm
7.4 Number of cylinders / Capacity of cylinders 4 - 3400 cm³
7.5 Fuel consumption according to VDI cycle 6.9 l/h
Miscellaneous
8.2 Working hydraulic pressure for attachments 210 Bar
8.3 Oil flow rate for attachments 97 l/min
8.4 Measured/guaranteed mean noise level at the ear of the operator < 76 dB(A)

Dimensional drawing

M 40-2 H M 40-2 H
M 40-2 H
Sprawdź okazje Manitou