Mobile Elevating Work Platforms

280 TJ ST5

280 TJ ST5

280 TJ ST5

Technical sheet :

280 TJ ST5

280 TJ ST5
Manitou - handling your world
Capacities Metric
Working height h21 27.73 m
Platform height* h7 25.73 m
Max. outreach l4 21.45 m
Pendular arm rotation (top / bottom) 56.8 ° / -62 °
Platform capacity / capacity (maximum) Q 350 kg / 240 kg
Turret rotation 360 °
Platform rotation (right / left) 90 ° / 90 °
Number of people (inside / outside) 3 / 2
Weight and dimensions
Platform weight* 16500 kg
Platform dimensions (length x width) lp / ep 2.3 m x 0.9 m
Overall width b1 2.48 m
Overall length l1 11.36 m
Overall height h17 2.73 m
Overall length (stowed) l9 8.09 m
Overall height (stowed) h18 2.71 m
Floor height (access) h20 0.4 m
Jib length l13 2.8 m
Counterweight offset (turret at 90°) a7 1.43 m
Internal turning radius (over tyres) b13 1.97 m
Outer turning radius Wa3 4.35 m
Ground clearance at centre of wheelbase m2 0.41 m
Wheelbase y 2.8 m
Performances
Drive speed - stowed 4.5 km/h
Drive speed - raised 0.8 km/h
Gradeability 40 %
Permissible leveling 4 °
Wheels
Tyres type Solid Tyres Cured-On
Dimensions of front wheels / rear wheels 1025 x 365 - 1025 x 365
Drive wheels (front / rear) 2 / 2
Steering wheels (front / rear) 2 / 2
Braking wheels (front / rear) 2 / 2
Engine/Battery
Engine brand / model / norm Yanmar - 4TNV88C - Stage 5
I.C. Engine power rating / Power (kW) 46 Hp / 34.3 kW
Miscellaneous
Ground Pressure 21.3 daN/cm²
Hydraulic Pressure 400 Bar
Hydraulic tank capacity 94 l
Fuel tank 76 l
Noise to environment (LwA) 102 dB(A)
Vibration on hands/arms 0.5 Nm
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage)
** According to "REDUCE cycle"

Load chart

Load Chart for AWP Metric 280 TJ ST5

Dimensional drawing

280 TJ ST5 280 TJ ST5 280 TJ ST5

Equipment

Standard
230V Predisposition
4 simultaneous movements
4 wheel drive
4 wheel steer with crab mode
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Backup electrical pump
CAN bus technology
Connected machine
Continuous turret rotation
Dead man pedal
Differential locking on rear axle
Easy Manager
Emergency stop button in platform and on frame
Engine on swivel chair
Engine with DPF
Front axle with limited slip
Fuel gauge with low level indicator
Horn in the platform
Hour meter
LED rotating beacon
Large basket with three entries
Oscillating front axle
Remote control
Stop & Go system
Telescopic jib
Turret orientation information
X Y function
Optional
110 or 230V plug with differential circuit breaker
Access control keypad for easy link
Additional storage boxes
Air predisposition
Battery blanket
Battery cut-off
Beep on every movement
Beep upon travel
Biodegradable oil
Engine Block Heater
Extreme cold oil
Highly efficient battery
Hydraulic oil heater
Large basket 2.30m with lateral door
Lockable fuel cap
Narrow basket 1.80m
Non-marking tyres
Onboard generator (3,5 or 5 kW)
Panel cradle
Personalized paintwork
Pipe cradle
SPS : Secondary protection system
Safety harness
Safety kit (Harness + helmet)
Safety valve
Screen protection on the lower box control
Socket 230 V + differential circuit breaker
Spark arrester
Water heater
Working light
280 TJ ST5
Check out our used equipment ads