Mobile Elevating Work Platforms

150 AETJ-L BI

150 AETJ-L BI

150 AETJ-L BI

Technical sheet :

150 AETJ-L BI

150 AETJ-L BI
Manitou - handling your world
Capacities Metric
Working height h21 15.4 m
Platform height h7 13.4 m
Max. outreach l4 7.81 m
Overhang l5 7.27 m
Pendular arm rotation (top / bottom) 70 ° / -70 °
Platform capacity Q 230 kg
Turret rotation 355 °
Platform rotation (right / left) 70 ° / 70 °
Number of people (inside / outside) 2 / 2
Weight and dimensions
Platform weight* 6435 kg
Platform dimensions (length x width) lp / ep 1.2 m x 0.92 m
Overall width b1 1.91 m
Overall length l1 6.11 m
Overall height h17 2.095 m
Overall length (stowed) l9 4.55 m
Overall height (stowed) h18 2.13 m
Floor height (access) h20 0.4 m
Jib length l13 1.26 m
Counterweight offset (turret at 90°) a7 0 m
Internal turning radius (over tyres) b13 1.88 m
Outer turning radius Wa3 4.27 m
Tailswing 0 m
Ground clearance at centre of wheelbase m2 0.185 m
Wheelbase y 2.2 m
Performances
Drive speed - stowed 6 km/h
Drive speed - raised 0.6 km/h
Gradeability 23 %
Permissible leveling 5 °
Wheels
Tyres type Foam Filled Non Marking
Dimensions of front wheels 0,65x0,25m
Drive wheels (front / rear) 0 / 2
Steering wheels (front / rear) 2 / 0
Braking wheels (front / rear) 0 / 2
Engine/Battery
Electric engine power rating 4.5 kW
Electric Pump 3.7 kW
I.C. Engine power rating / Power (kW) 12.1 Hp / 9.2 kW
Battery / Batteries capacity 48 V / 300 Ah
Integrated charger (V / Ah) 48 V / 45 AMPERE
Miscellaneous
Ground Pressure 12.73 daN/cm²
Hydraulic Pressure 200 Bar
Hydraulic tank capacity 12 l
Fuel tank 30 l
Vibration on hands/arms 2.5 Nm
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage)

Load chart

Load Chart metric 150 AETJ-L BI

Dimensional drawing

150 AETJ-L BI 150 AETJ-L BI 150 AETJ-L BI

Equipment

Standard
230V Predisposition
All-terrain, non-marking, foam-filled tyres
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Battery charge indicator lamp
CAN bus technology
Emergency stop button in platform and on frame
Horn in the platform
Hour meter
Integrated diagnostic assistance
Manual emergency lowering
Multi-voltage integrated charger
Negative-type braking on rear wheels
Non-marking, foam-filled tyres
Pendular arm
Platform with open-work floor
Proportional controls
Protective cover for control panel
Slinging and securing rings
Tool box in platform
Traction battery
Optional
110 or 230V plug with differential circuit breaker
Air predisposition
Beep on every movement
Beep upon travel
Biodegradable oil
Centralized recharging of battery
Extreme cold oil
Flashing Light
Lockable fuel cap
Personalized paintwork
SMS : Safe Man System
Safety harness
Water predisposition
Working headlight in platform
150 AETJ-L BI
Check out our used equipment ads