Mobile Elevating Work Platforms

MAN'GO 12

MAN'GO 12

MAN'GO 12

Technical sheet :

MAN'GO 12

MAN'GO 12
Manitou - handling your world
Capacities Metric
Working height h21 11.91 m
Platform height h7 9.91 m
Max. outreach r1 6.69 m
Overhang h31 4.8 m
Pendular arm rotation (bottom) +-70 °
Platform capacity Q 230 kg
Turret rotation 350 °
Platform rotation (right / left) 70 ° / 66 °
Number of people (inside / outside) 2 / 2
Weight and dimensions
Platform weight* 4150 kg
Platform dimensions (length x width) lp / ep 1.5 m x 0.98 m
Overall width b1 1.8 m
Overall length l1 5.5 m
Overall height h17 2.02 m
Overall length (stowed) l9 4.5 m
Overall height (stowed) h18 2.49 m
Floor height (access) h20 0.3 m
Jib length l13 1.46 m
Counterweight offset (turret at 90°) a7 0.19 m
Internal turning radius (over tyres) b13 1.71 m
External turning radius Wa3 4.11 m
Ground clearance at centre of wheelbase m2 0.32 m
Wheelbase y 2 m
Performances
Drive speed - stowed 5.2 km/h
Drive speed - raised 1 km/h
Gradeability 40 %
Permissible leveling 4 °
Wheels
Tyres type Solid Tyres Cured-On
Drive wheels (front / rear) 2 / 2
Steering wheels (front / rear) 2 / 0
Braking wheels (front / rear) 2 / 2
Engine/Battery
Engine brand / model / norm Kubota - D1105-E4B / Stage V
I.C. Engine power rating / Power (kW) 26 Hp / 18.5 kW
Miscellaneous
Ground Pressure 15 daN/cm²
Hydraulic Pressure 398 Bar
Hydraulic tank capacity 60 l
Fuel tank 53 l
Noise to environment (LwA) 100 dB(A)
Vibration on hands/arms < 2.5 m/s
Daily consumption ** 4.41 l
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage)
*Varies according to options and standards of the country to which the machine is delivered
** According to "REDUCE cycle"

Load chart

Load Chart for AWP Metric MAN'GO 12

Dimensional drawing

MAN'GO 12 MAN'GO 12 MAN'GO 12

Equipment

Standard
3 Simultaneous movements
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Basket 1,500 mm
CAN bus technology
Dead man pedal
Differential locking
Easy Manager
Emergency stop button in platform and on frame
Fuel gauge with low level indicator
Horn in the platform
Hour meter
Leveling unlocking
Management via engine speed bearing
Manual emergency lowering
Pendular arm
Proportional controls
Protective cover for control panel
Quick access to components
Simplified lift control system
Optional
110 or 230V plug with differential circuit breaker
Air predisposition
Battery cut-off
Beep on every movement
Beep upon travel
Biodegradable oil
Catalytic cleaner
Coded anti-start
Extreme cold oil
Highly capacity battery
Initial verification report before putting into service
Lockable fuel cap
Non-marking tyres
Onboard generator (3,5 or 5 kW)
SMS : Safe Man System
Safety harness
Screen protection on the lower box control
Spark arrester
Turret cover with key lock
Water heater
Water predisposition
Working light
MAN'GO 12
Check out our used equipment ads