Warehousing

EMA II 20

EMA II 20

EMA II 20

Technical sheet :

EMA II 20

EMA II 20
Manitou - handling your world
Technical characteristics Metric
1.1 Manufacturer Manitou
1.2 Model Name EMA II 20
1.3 Power source Battery
1.4 Operator type Seated
1.5 Max. capacity Q 2000 kg
1.6 Load centre of gravity c 500 mm
1.8 Load distance, centre of drive axle to fork x 278 mm
1.9 Wheelbase y 1745 mm
Weight
2.1 Service Weight 6600 kg
2.2 Weight on front axle (laden) / rear axle (laden) 4800 kg / 4400 kg
2.3 Weight on front axle (Unladen) / rear axle (Unladen) 2200 kg / 4400 kg
Wheels
3.1 Tyres type PPS
3.2 Dimensions of front wheels 412 x 178
3.3 Dimensions of rear wheels 457 x 152
3.5 Number of front wheels / rear wheels 2 / 2
3.2 Number of drive wheels 2
3.6 Front wheel gauge b10 1125 mm
3.7 Rear wheel gauge b11 1200 mm
Dimensions
4.1 Tilt of Mast Forward (deg) / Backward (deg) α / β 1.5 / 3.5
4.4 Max. lifting height h3 7620 mm
4.7 Height of overhead guard (cabin) h6 2260 mm
4.8 Seat height/stand height h7 1200 mm
4.19 Overall length l1 3710 mm
4.20 Length to face of forks l2 2560 mm
4.21 Overall width b1 125 mm
4.22 Forks section / width / length s / e / l 40 mm x 125 mm x 1150 mm
4.23 Fork carriage ISO 2328 (class/form) A/B 2
4.24 Fork carriage width b3 860 mm
4.31 Ground clearance below mast m1 50 mm
4.32 Ground clearance at centre of wheelbase m2 130 mm
4.33 Aisle width for 1000 x 1200 pallet widthways Ast 1900 mm
4.34 Aisle width for 800 x 1200 pallet lengthways Ast 2100 mm
Performances
5.1 Travel speed (laden / unladen) 9 km/h / 9.5 km/h
5.2 Lifting speed (laden / unladen) 0.35 m/s / 0.45 m/s
5.3 Lowering speed (laden / unladen) 0.4 m/s / 0.36 m/s
5.7 Gradeability - laden / unladen 8 % / 10.5 %
5.9 Service brake Hydraulic
Engine
6.1 Drive motor rating S2 60 min 10 kW
6.2 Lift motor rating at S3 15% 9 kW
6.3 Battery according to DIN 43531/35/36 A, B, C DIN 43595
6.4 Battery / Batteries capacity 48 V - 750 Ah
6.5 Battery weight (+/- 5%) 1135 kg
Miscellaneous
8.1 Type of drive control Mosfet AC speed controller
8.2 Working hydraulic pressure for attachments (bar) 200 Bar
8.3 Oil flow rate for attachments 25 l/min
8.4 Measured/guaranteed mean noise level at the ear of the operator < 73 dB(A)
8.4 Sound level at the driver's ear according to DIN 12 053 73 dB(A)

Dimensional drawing

EMA II 20 EMA II 20

Characteristics of masts and residual capacities

Free Lift Triplex FLT 72 FLT 4200 FLT 4530 FLT 5010 FLT 5550 FLT 6000 FLT 6600 FLT 7620 FLT 8010 FLT 8610
h3 - Mast lifting height mm 7200 4200 4530 5010 5550 6000 6600 7620 8010 8610
h2 - Mast free lift mm 2580 1480 1590 1750 1930 2080 2330 2770 2900 3200
h1 - Mast height lowered mm 3400 2300 2410 2570 2750 2900 3150 3590 3720 4020
h4 - Mast height extended mm 8030 5030 5360 5840 6380 6830 7430 8450 8840 9440
Residual capacity with integrated side shift (Industrial load chart) kg 1200 1800 1700 1600 1500 1400 1300 1150 1080 1000
Residual capacity with integrated sideshift (Maximum height & LC = 600 mm) kg 1150 1600 1600 1500 1400 1300 1250 1050 1000 950
EMA II 20
Check out our used equipment ads