Forklift Trucks

MC 25-2

MC 25-2

MC 25-2

Technical sheet :

MC 25-2

MC 25-2
Manitou - handling your world
Technical characteristics Metric
1.1 Manufacturer Manitou
1.2 Model Name MC 25-2
1.3 Power source Diesel
1.4 Operator type Seated
1.5 Max. capacity Q 2500 kg
1.6 Load centre of gravity c 500 mm
1.8 Load distance, centre of drive axle to fork x 621 mm
1.9 Wheelbase y 1900 mm
Weight
2.1 Service Weight 3875 kg
2.2 Weight on front axle (laden) / rear axle (laden) 5510 kg / 865 kg
2.3 Weight on front axle (Unladen) / rear axle (Unladen) 1533 kg / 2342 kg
Wheels
3.1 Tyres type Pneumatic
3.2 Dimensions of front wheels 12,5/80-18/12 SL R4
3.3 Dimensions of rear wheels 7.00-12/12 ED PLUS
3.5 Number of front wheels / rear wheels 2 / 2
3.2 Number of drive wheels 2
3.6 Front wheel gauge b10 1159 mm
3.7 Rear wheel b11 1112 mm
Dimensions
4.1 Tilt of Mast Forward (deg) / Backward (deg) α / β 10 / 12
4.7 Height of overhead guard (cabin) h6 2155 mm
4.7 Overall height of standard overhead guard h6 2155 mm
4.8 Seat height/stand height h7 1034 mm
4.19 Overall length l1 4195 mm
4.20 Length to face of forks l2 3045 mm
4.21 Overall width b1 1450 mm
4.22 Forks section / width / length s / e / l 40 mm x 122 mm x 1150 mm
4.23 Fork carriage ISO 2328 (class/form) A/B FEM 2A
4.24 Fork carriage width b3 1260 mm
4.31 Ground clearance below mast m1 300 mm
4.32 Ground clearance at centre of wheelbase m2 320 mm
4.33 Aisle width for 1000 x 1200 pallet widthways Ast 4591 m
4.35 Turning radius Wa 2620 mm
Performances
5.1 Travel speed (laden / unladen) 12 km/h / 24.9 km/h
5.2 Lifting speed (laden / unladen) 0.47 Nm / 0.46 Nm
5.3 Lowering speed (laden / unladen) 0.5 Nm / 0.3 Nm
5.10 Service brake Hydraulic brakes by loss of pressure
Engine
7.1 Engine brand / model / norm Kubota / D1803 CRT E5B / Stage V
7.2 Engine power according to ISO 1585 36 kW
7.3 Rated speed 2700 tr/min
7.4 Number of cylinders / Capacity of cylinders 4-2434 cm³
7.5 Fuel consumption according to VDI cycle 5,2
Miscellaneous
8.1 Type of drive control Cable
8.2 Working hydraulic pressure for attachments (bar) 180 Bar
8.3 Oil flow rate for attachments 53 l/min
8.4 Measured/guaranteed mean noise level at the ear of the operator < 82 dB(A)

Dimensional drawing

MC 25-2 MC 25-2

Characteristics of masts and residual capacities

Full Visibility Duplex FVD 33 FVD 37 FVD 45
h2 - Free lift mm 112 112 112
h1 - Height mast Lowered mm 2338 2598 3038
h3 - Lifting Height mm 3300 3700 4500
h4 - Height mast extended mm 4090 4490 5290
α / β - Mast inclination (front / rear) ° 10 / 12 10 / 12 10 / 12
Free Lift Triplex FLT 34 FLT 37 FLT 40 FLT 43 FLT 47 FLT 55
h2 - Free lift mm 1210 1310 1410 1510 1660 1920
h1 - Height mast Lowered mm 1988 2088 2188 2338 2438 2788
h3 - Lifting Height mm 3300 3700 4000 4300 4700 5500
h4 - Height mast extended mm 4236 4536 4836 5168 5536 6408
α / β - Mast inclination (front / rear) ° 10 / 12 10 / 12 10 / 12 10 / 12 10 / 12 6 / 6
Residual capacity at max height kg 1650
Residual capacity without attachment (Industrial load chart)  kg 1650
Height at max capacity mm 3000
Full Visibility Triplex FVT 33
h2 - Free lift mm 124
h1 - Height mast Lowered mm 1878
h3 - Lifting Height mm 3300
h4 - Height mast extended mm 4079
α / β - Mast inclination (front / rear) ° 10 / 12
MC 25-2
Check out our used equipment ads