Forklift Trucks

MC 18-4

MC 18-4

MC 18-4

Technical sheet :

MC 18-4

MC 18-4
Manitou - handling your world
Technical characteristics Metric
1.1 Manufacturer Manitou
1.2 Model Name MC 18-4
1.3 Power source Diesel
1.4 Operator type Seated
1.5 Max. capacity Q 1800 kg
1.6 Load centre of gravity c 500 mm
1.8 Load distance, centre of drive axle to fork x 616 mm
1.9 Wheelbase y 1900 mm
Weight
2.1 Service Weight 3562 kg
2.2 Weight on front axle (laden) / rear axle (laden) 4237 kg / 1125 kg
2.3 Weight on front axle (Unladen) / rear axle (Unladen) 1662 kg / 1900 kg
Wheels
3.1 Tyres type Pneumatic
3.2 Dimensions of front wheels 12,5/80-18/12 SL R4
3.3 Dimensions of rear wheels 27x10-12 SKS
3.5 Number of front wheels / rear wheels 2 / 2
3.2 Number of drive wheels 4
3.6 Front wheel gauge b10 1159 mm
3.7 Rear wheel b11 1176 mm
Dimensions
4.1 Tilt of Mast Forward (deg) / Backward (deg) α / β 10 / 12
4.7 Height of overhead guard (cabin) h6 2155 mm
4.7 Overall height of standard overhead guard h6 2155 mm
4.8 Seat height/stand height h7 1094 mm
4.19 Overall length l1 4100 mm
4.20 Length to face of forks l2 2950 mm
4.21 Overall width b1 1450 mm
4.22 Forks section / width / length s / e / l 35 mm x 100 mm x 1150 mm
4.23 Fork carriage ISO 2328 (class/form) A/B FEM 2A
4.24 Fork carriage width b3 1260 mm
4.31 Ground clearance below mast m1 300 mm
4.32 Ground clearance at centre of wheelbase m2 310 mm
4.35 Turning radius Wa 3370 mm
Performances
5.1 Travel speed (laden / unladen) 12 km/h / 24.9 km/h
5.2 Lifting speed (laden / unladen) 0.4 Nm / 0.4 Nm
5.3 Lowering speed (laden / unladen) 0.4 Nm / 0.4 Nm
5.5 Drawbar pull (Laden / Unladen) 1985 daN / 1950 daN
5.7 Gradeability - laden / unladen 37 % / 65 %
5.10 Service brake Hydraulic brakes by loss of pressure
Engine
7.1 Engine brand / model / norm Kubota / D1803 CR E5B / Stage V
7.2 Engine power according to ISO 1585 27 kW
7.3 Rated speed 3000 tr/min
7.4 Number of cylinders / Capacity of cylinders 4-1498 cm³
7.5 Fuel consumption according to VDI cycle 4
Miscellaneous
8.1 Type of drive control Cable
8.2 Working hydraulic pressure for attachments (bar) 180 Bar
8.3 Oil flow rate for attachments 37 l/min
8.4 Measured/guaranteed mean noise level at the ear of the operator < 79 dB(A)

Dimensional drawing

MC 18-4 MC 18-4

Characteristics of masts and residual capacities

Full Visibility Duplex FVD 33 FVD 37 FVD 40 FVD 45
h2 - Free lift mm 85 85 85 85
h1 - Height mast Lowered mm 2348 2608 2798 3048
h3 - Lifting Height mm 3300 3700 4000 4500
h4 - Height mast extended mm 4018 4428 4768 5268
α / β - Mast inclination (front / rear) ° 10 / 12 10 / 12 10 / 12 10 / 12
Residual capacity at max height kg 1800
Residual capacity without attachment (Industrial load chart)  kg 1800
Height at max capacity mm 3300
Free Lift Triplex FLT 37 FLT 43 FLT 47 FLT 55
h2 - Free lift mm 1305 1505 1655 1915
h1 - Height mast Lowered mm 1998 2198 2348 2608
h3 - Lifting Height mm 3700 4300 4700 5500
h4 - Height mast extended mm 4453 5053 5453 6253
α / β - Mast inclination (front / rear) ° 10 / 12 10 / 12 10 / 12 6 / 6
Full Visibility Triplex FVT 33
h2 - Free lift mm 135
h1 - Height mast Lowered mm 1888
h3 - Lifting Height mm 3300
h4 - Height mast extended mm 4048
α / β - Mast inclination (front / rear) ° 10 / 12
MC 18-4
Check out our used equipment ads