| Capacities | Metric | |||
|---|---|---|---|---|
| Working height | h21 | 25.89 m | ||
| Platform height* | h7 | 23.89 m | ||
| Max. outreach | l4 | 19.7 m | ||
| Pendular arm rotation (top / bottom) | -63 ° / 70.3 ° | |||
| Platform capacity | Q | 400 kg | ||
| Turret rotation | 360 ° | |||
| Platform rotation (right / left) | 90 ° / 90 ° | |||
| Number of people (inside / outside) | 3 / 3 |
| Weight and dimensions | ||||
|---|---|---|---|---|
| Platform weight* | 16400 kg | |||
| Platform dimensions (length x width) | lp / ep | 2.3 m x 0.9 m | ||
| Overall width | b1 | 2.48 m | ||
| Overall length | l1 | 10.84 m | ||
| Overall height | h17 | 2.71 m | ||
| Overall length (stowed) | l9 | 7.88 m | ||
| Overall height (stowed) | h18 | 2.8 m | ||
| Floor height (access) | h20 | 0.48 m | ||
| Jib length | l13 | 2.4 m | ||
| Counterweight offset (turret at 90°) | a7 | 1.43 m | ||
| Internal turning radius (over tyres) | b13 | 1.97 m | ||
| Outer turning radius | Wa3 | 4.35 m | ||
| Ground clearance at centre of wheelbase | m2 | 0.42 m | ||
| Wheelbase | y | 2.8 m |
| Performances | ||||
|---|---|---|---|---|
| Drive speed - stowed | 4.5 km/h | |||
| Drive speed - raised | 0.8 km/h | |||
| Gradeability | 40 % | |||
| Permissible leveling | 4 ° |
| Wheels | ||||
|---|---|---|---|---|
| Tyres type | Solid Tyres Cured-On | |||
| Dimensions of front wheels / rear wheels | 1025 x 365 - 1025 x 365 | |||
| Drive wheels (front / rear) | 2 / 2 | |||
| Steering wheels (front / rear) | 2 / 2 | |||
| Braking wheels (front / rear) | 2 / 2 |
| Engine/Battery | ||||
|---|---|---|---|---|
| Engine brand / model / norm | Yanmar - 4TNV88C - Stage 5 | |||
| I.C. Engine power rating / Power (kW) | 46 Hp / 34.3 kW |
| Miscellaneous | ||||
|---|---|---|---|---|
| Ground Pressure | 21.3 daN/cm² | |||
| Hydraulic Pressure | 400 Bar | |||
| Hydraulic tank capacity | 94 l | |||
| Fuel tank | 76 l | |||
| Noise to environment (LwA) | 102 dB(A) | |||
| Vibration on hands/arms | 0.5 Nm |
| Standards compliance | ||||
|---|---|---|---|---|
| This machine is in compliance with: | European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage) |
** According to "REDUCE cycle"
Load chart
Load Chart for AWP Metric
Dimensional drawing
Equipment
| Standard |
|---|
| 230V Predisposition |
| 4 simultaneous movements |
| 4 wheel drive |
| 4 wheel steer with crab mode |
| Audible alarm and illuminated indicator lamp (leveling, overload, lowering) |
| Backup electrical pump |
| Connected machine |
| Continuous turret rotation |
| Differential locking on rear axle |
| Easy Manager |
| Electronic platform compensation |
| Emergency stop button in platform and on frame |
| Engine mounted on sliding platform |
| Engine with DPF |
| Front axle with limited slip |
| Fuel gauge with low level indicator |
| Hour meter |
| Integrated diagnostic assistance |
| LED rotating beacon |
| Large basket with three entries |
| Operator presence pedal |
| Oscillating front axle |
| Remote control |
| Stop & Go system |
| Turret orientation information |
| X Y function |
| Optional |
|---|
| 110 or 230V plug with differential circuit breaker |
| Access control keypad for easy link |
| Additional storage boxes |
| Air predisposition |
| Battery blanket |
| Battery charger |
| Battery cut-off |
| Beep on every movement |
| Beep upon travel |
| Biodegradable oil |
| Engine Block Heater |
| Engine preheat |
| Hydraulic oil heater |
| Key lock on fuel tank |
| Large basket 2.30m with lateral door |
| Narrow basket 1.80m |
| Non-marking tyres |
| Onboard generator (3,5 or 5 kW) |
| Panel cradle |
| Panel support kit |
| Pipe cradle |
| SPS : Secondary protection system |
| Safety kit (Harness + helmet) |
| Safety valve |
| Socket 230 V + differential circuit breaker |
| Spark arrester |
| Tube support kit |
| Working light |
