| Capacities | Metric | |||
|---|---|---|---|---|
| Working height | h21 | 16.25 m | ||
| Platform height* | h7 | 14.21 m | ||
| Max. outreach | l4 | 8.94 m | ||
| Overhang | l5 | 7 m | ||
| Pendular arm rotation (bottom) | 70 ° | |||
| Platform capacity | Q | 400 kg | ||
| Turret rotation | 350 ° | |||
| Platform rotation (right / left) | 90 ° / 90 ° | |||
| Number of people (inside / outside) | 3 / 3 |
| Weight and dimensions | ||||
|---|---|---|---|---|
| Platform weight* | 8100 kg | |||
| Platform dimensions (length x width) | lp / ep | 2.3 m x 0.9 m | ||
| Overall width | b1 | 2.3 m | ||
| Overall length | l1 | 6.92 m | ||
| Overall height | h17 | 2.37 m | ||
| Overall length (stowed) | l9 | 4.82 m | ||
| Overall height (stowed) | h18 | 2.7 m | ||
| Floor height (access) | h20 | 0.4 m | ||
| Counterweight offset (turret at 90°) | a7 | 0.23 m | ||
| Internal turning radius (over tyres) | b13 | 1.32 m | ||
| Outer turning radius | Wa3 | 3.66 m | ||
| Ground clearance at centre of wheelbase | m2 | 0.43 m | ||
| Wheelbase | y | 2.22 m |
| Performances | ||||
|---|---|---|---|---|
| Drive speed - stowed | 6 km/h | |||
| Drive speed - raised | 0.8 km/h | |||
| Gradeability | 40 % | |||
| Permissible leveling | 5 ° |
| Wheels | ||||
|---|---|---|---|---|
| Tyres type | Foam-filled | |||
| Drive wheels (front / rear) | 2 / 2 | |||
| Steering wheels (front / rear) | 2 / 2 | |||
| Braking wheels (front / rear) | 0 / 2 |
| Engine/Battery | ||||
|---|---|---|---|---|
| Engine brand / model / norm | Kubota - V2403-M - Stage 3A | |||
| I.C. Engine power rating / Power (kW) | 46 Hp / 34.1 kW |
| Miscellaneous | ||||
|---|---|---|---|---|
| Ground Pressure | 10.88 daN/cm² | |||
| Hydraulic Pressure | 300 Bar | |||
| Hydraulic tank capacity | 54 l | |||
| Fuel tank | 52 l | |||
| Vibration on hands/arms | 0.5 Nm | |||
| Daily consumption ** | 7 l |
| Standards compliance | ||||
|---|---|---|---|---|
| This machine is in compliance with: | European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage) |
** According to "REDUCE cycle"
Load chart
Load Chart for AWP Metric
Dimensional drawing
Equipment
| Standard |
|---|
| 230V Predisposition |
| 4 simultaneous movements |
| 4 wheel drive |
| 4 wheel steer with crab mode |
| Audible alarm and illuminated indicator lamp (leveling, overload, lowering) |
| Backup electrical pump |
| Basket 2,300 mm |
| CAN bus technology |
| Dead man pedal |
| Differential locking on rear axle |
| Easy Manager |
| Front axle with limited slip |
| Fuel gauge with low level indicator |
| Horn in the platform |
| Hour meter |
| Integrated diagnostic assistance |
| Large basket with three entries |
| Leveling unlocking |
| Management via engine speed bearing |
| Oscillating front axle |
| Optional |
|---|
| 110 or 230V plug with differential circuit breaker |
| 20" tyres |
| Additional storage boxes |
| Air predisposition |
| Beep on every movement |
| Beep upon travel |
| Biodegradable oil |
| Catalytic cleaner |
| Coded anti-start |
| Continuous turret rotation |
| Extreme cold oil |
| Highly efficient battery |
| Initial verification report before putting into service |
| Lockable fuel cap |
| Non-marking tyres |
| Onboard generator (3,5 or 5 kW) |
| Personalized paintwork |
| Refinery kit |
| SMS : Safe Man System |
| Safety harness |
