Mobile Elevating Work Platforms

220 TJ ST5

220 TJ ST5

220 TJ ST5

Technical sheet :

220 TJ ST5

220 TJ ST5
Manitou - handling your world
Capacities Metric
Working height h21 21.77 m
Platform height* h7 19.77 m
Max. outreach l4 17.63 m
Pendular arm rotation (top / bottom) 69 ° / -66 °
Platform capacity Q 230 kg
Turret rotation 360 °
Platform rotation (right / left) 90 ° / 90 °
Number of people (inside / outside) 2 / 2
Weight and dimensions
Platform weight* 11850 kg
Platform dimensions (length x width) lp / ep 2.1 m x 0.8 m
Overall width b1 2.48 m
Overall length l1 9.8 m
Overall height h17 2.66 m
Overall length (stowed) l9 7.29 m
Overall height (stowed) h18 2.72 m
Floor height (access) h20 0.39 m
Jib length l13 2 m
Counterweight offset (turret at 90°) a7 1.35 m
Internal turning radius (over tyres) b13 2.96 m
Outer turning radius Wa3 6.19 m
Ground clearance at centre of wheelbase m2 0.44 m
Wheelbase y 2.8 m
Performances
Drive speed - stowed 4.4 km/h
Drive speed - raised 1 km/h
Gradeability 40 %
Permissible leveling 4 °
Wheels
Tyres type Solid Tyres Cured-On
Dimensions of front wheels / rear wheels 1025 x 365 - 1025 x 365
Drive wheels (front / rear) 2 / 2
Steering wheels (front / rear) 2 / 0
Braking wheels (front / rear) 0 / 2
Engine/Battery
Engine brand / model / norm Kubota - 3TNV88C - Stage 5
I.C. Engine power rating / Power (kW) 36.2 Hp / 27.5 kW
Miscellaneous
Ground Pressure 18.2 daN/cm²
Hydraulic Pressure 340 Bar
Hydraulic tank capacity 94 l
Fuel tank 72 l
Noise to environment (LwA) 105 dB(A)
Vibration on hands/arms 0.5 Nm
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low voltage)
*Varies according to options and standards of the country to which the machine is delivered

Load chart

Load Chart for AWP Metric 220 TJ ST5

Dimensional drawing

220 TJ ST5 220 TJ ST5 220 TJ ST5

Equipment

Standard
230V Predisposition
4 simultaneous movements
4 wheel drive
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Backup electrical pump
Connected machine
Continuous turret rotation
Differential locking on rear axle
Easy Manager
Easy fast slinging system
Electronic platform compensation
Emergency stop button in platform and on frame
Engine mounted on sliding platform
Engine with DPF
Front axle with limited slip
Fuel gauge with low level indicator
Fully galvanized basket with demountable floor
Hour meter
Integrated diagnostic assistance
LED rotating beacon
LS pump
Leveling unlocking
Oscillating front axle
Proportional controls
Stop & Go system
Optional
110 or 230V plug with differential circuit breaker
Access control keypad for easy link
Air predisposition
Battery blanket
Battery cut-off
Beep on every movement
Beep upon travel
Biodegradable oil
Engine Block Heater
Exhaust purifier
Extreme cold oil
Galvanized basket 2,100 mm
Hydraulic oil heater
Key lock on fuel tank
Non-marking tyres
Onboard generator (3,5 or 5 kW)
Personalized paintwork
Remote control
SPS : Secondary protection system
Safety harness
Safety kit (Harness + helmet)
Safety valve
Screen protection on the lower box control
Socket 230 V + differential circuit breaker
Spark arrester
Turret cover with key lock
Turret orientation information
Water predisposition
Working light
220 TJ ST5
Check out our used equipment ads