Technical characteristics				Metric
1.1		Manufacturer				Manitou
1.2		Model Name				EMA II 18 HL-2
1.3		Power source				Battery
1.4		Operator type				Seated
1.5		Max. capacity		Q		1750 kg
1.6		Load centre of gravity		c		500 mm
1.8		Load distance, centre of drive axle to fork		x		308 mm
1.9		Wheelbase		y		1745 mm

		Weight
2.1		Service Weight				8700 kg
2.2		Weight on front axle (laden) / rear axle (laden)				6330 kg / 4080 kg
2.3		Weight on front axle (Unladen) / rear axle (Unladen)				3480 kg / 5220 kg

		Wheels
3.1		Tyres type				PPS
3.2		Dimensions of front wheels				412 x 178
3.3		Dimensions of rear wheels				457 x 178
3.5		Number of front wheels / rear wheels				2 / 2
3.2		Number of drive wheels				2
3.6		Front wheel gauge		b10		1110 mm
3.7		Rear wheel		b11		1350 mm

		Dimensions
4.1		Tilt of Mast Forward (deg) / Backward (deg)		α / β		1.5 / 4
4.4		Max. lifting height		h3		12720 mm
4.7		Height of overhead guard (cabin)		h6		2260 mm
4.8		Seat height/stand height		h7		1200 mm
4.19		Overall length		l1		3740 mm
4.20		Length to face of forks		l2		2590 mm
4.21		Overall width		b1		860 mm
4.22		Forks section / width / length		s / e / l		40 mm x 125 mm x 1150 mm
4.23		Fork carriage ISO 2328 (class/form) A/B				2
4.24		Fork carriage width		b3		860 mm
4.31		Ground clearance below mast		m1		50 mm
4.32		Ground clearance at centre of wheelbase		m2		130 mm
4.33		Aisle width for 1000 x 1200 pallet widthways		Ast		2000 mm
4.34		Aisle width for 800 x 1200 pallet lengthways		Ast		2200 mm

		Performances
5.1		Travel speed (laden / unladen)				9 km/h / 9.5 km/h
5.2		Lifting speed (laden / unladen)				0.35 Nm / 0.45 Nm
5.3		Lowering speed (laden / unladen)				0.4 Nm / 0.36 Nm
5.7		Gradeability - laden / unladen				8 % / 10.5 %
5.10		Service brake				Hydraulic

		Engine
6.1		Drive motor rating S2 60 min				10 kW
6.2		Lift motor rating at S3 15%				9 kW
6.3		Battery according to DIN 43531/35/36 A, B, C				DIN 43595
6.4		Battery / Batteries capacity				48 V - 930 Ah
6.5		Battery weight (+/- 5%)				1300 kg

		Miscellaneous
8.1		Type of drive control				Mosfet AC speed controller
8.2		Working hydraulic pressure for attachments (bar)				200 Bar
8.3		Oil flow rate for attachments				25 l/min
8.4		Measured/guaranteed mean noise level at the ear of the operator				< 73 dB(A)
8.4		Sound level at the driver's ear according to DIN 12 053				73 dB(A)