Forklift Trucks

ME 425C

ME 425C

ME 425C

Technical sheet :

ME 425C

ME 425C
Manitou - handling your world
Technical characteristics Metric
1.1 Manufacturer Manitou
1.2 Model Name ME 425 C
1.3 Power source Electric
1.4 Operator type Seated
1.5 Max. capacity Q 2500 kg
1.6 Load centre of gravity c 500 mm
1.8 Load distance, centre of drive axle to fork x 455 mm
1.9 Wheelbase y 1485 mm
Weight
2.1 Service Weight 4300 kg
2.2 Weight on front axle (laden) / rear axle (laden) 6060 kg / 740 kg
2.3 Weight on front axle (Unladen) / rear axle (Unladen) 1960 kg / 2340 kg
Wheels
3.1 Tyres type PPS
3.2 Dimensions of front wheels 23 x 9-10
3.3 Dimensions of rear wheels 18 x 7-8
3.5 Number of front wheels / rear wheels 2 / 2
3.2 Number of drive wheels 2
3.6 Front wheel gauge b10 1058 mm
3.7 Rear wheel b11 960 mm
Dimensions
4.1 Tilt of Mast Forward (deg) / Backward (deg) α / β 5 / 10
4.7 Height of overhead guard (cabin) h6 2155 mm
4.8 Seat height/stand height h7 1070 mm
4.12 Height of towing bar (coupling height) h10 303 mm
4.19 Overall length l1 3492 mm
4.20 Length to face of forks l2 2342 mm
4.21 Overall width b1 1265 mm
4.22 Forks section / width / length s / e / l 122 mm x 1150 mm x 40 mm
4.23 Fork carriage ISO 2328 (class/form) A/B 2A
4.24 Fork carriage width b3 1038 mm
4.31 Ground clearance below mast m1 112 mm
4.32 Ground clearance at centre of wheelbase m2 120 mm
4.33 Aisle width for 1000 x 1200 pallet widthways Ast 3738 mm
4.34 Aisle width for 800 x 1200 pallet lengthways Ast 3938 mm
4.35 Turning radius Wa 2090 mm
4.36 Internal turning radius (over tyres) b13 730 mm
Performances
5.1 Travel speed (laden / unladen) 14 km/h / 14 km/h
5.2 Lifting speed (laden / unladen) 0.23 Nm / 0.43 Nm
5.3 Lowering speed (laden / unladen) 0.41 Nm / 0.22 Nm
5.5 Drawbar pull (Laden / Unladen) 1800 daN / 1700 daN
5.7 Gradeability - laden / unladen 11 % / 12 %
5.10 Service brake Hydraulic
Engine
6.1 Drive motor rating S2 60 min 11 kW
6.2 Lift motor rating at S3 15% 8.6 kW
6.3 Battery according to DIN 43531/35/36 A, B, C DIN43531 B
6.4 Battery / Batteries capacity 48 V / 700 Ah
7.5 Fuel consumption according to VDI cycle 5.8
Miscellaneous
8.1 Type of drive control Electronic
8.2 Working hydraulic pressure for attachments (bar) 175 Bar
8.3 Oil flow rate for attachments 35 l/min
8.4 Measured/guaranteed mean noise level at the ear of the operator < 72 dB(A)

Dimensional drawing

ME 425C ME 425C

Characteristics of masts and residual capacities

Full Visibility Duplex FVD 27 FVD 30 FVD 33 FVD 36 FVD 40 FVD 43 FVD 45
h2 - Free lift mm 140 140 140 140 140 140 140
h1 - Height mast Lowered mm 1855 2005 2170 2305 2555 2730 2830
h3 - Lifting Height mm 2700 3000 3300 3600 4000 4300 4500
h4 - Height mast extended mm 3350 3650 3980 4250 4650 4970 5150
α / β - Mast inclination (front / rear) ° 5 / 6 5 / 10 5 / 10 5 / 10 5 / 10 5 / 6 5 / 6
Residual capacity without attachment (Industrial load chart)  kg 2500 2500 2500 2500 2500 2500 2450
Residual capacity with integrated side shift (Industrial load chart) kg 2500 2500 2500 2500 2500 2450 2400
Residual capacity with hooked-on side shift (Industrial load chart) kg 2500 2500 2500 2500 2500 2500 2450
Height at max capacity mm 2700 3000 3300 3600 4000 4300 4500
Height at max capacity with integrated sideshift mm 2700 3000 3300 3600 4000 4000 4000
Free Lift Duplex FLD 27 FLD 30 FLD 33 FLD 36 FLD 40
h2 - Free lift mm 1250 1350 1500 1650 1900
h1 - Height mast Lowered mm 1866 1980 2130 2280 2530
h3 - Lifting Height mm 2700 3000 3300 3600 4000
h4 - Height mast extended mm 3370 3635 3970 4270 4635
α / β - Mast inclination (front / rear) ° 5 / 6 5 / 10 5 / 10 5 / 10 5 / 10
Residual capacity without attachment (Industrial load chart)  kg 2500 2500 2500 2500 2500
Residual capacity with integrated side shift (Industrial load chart) kg 2500 2500 2500 2500 2500
Residual capacity with hooked-on side shift (Industrial load chart) kg 2500 2500 2500 2500 2500
Height at max capacity mm 2700 3000 3300 3600 4000
Height at max capacity with integrated sideshift mm 2700 3000 3300 3600 4000
Free Lift Triplex FLT 40 FLT 43 FLT 45 FLT 48 FLT 50 FLT 55 FLT 60 FLT 65
h2 - Free lift mm 1255 1355 1425 1525 1590 1755 1975 2150
h1 - Height mast Lowered mm 1925 2025 2095 2195 2260 2425 2645 2820
h3 - Lifting Height mm 4000 4300 4500 4800 5000 5500 6000 6500
h4 - Height mast extended mm 4680 4980 5230 5480 5680 5180 6690 7180
α / β - Mast inclination (front / rear) ° 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 3 / 6 3 / 6 3 / 6
Residual capacity without attachment (Industrial load chart)  kg 2500 2450 2350 2250 2150 2050 1650 1350
Residual capacity with integrated side shift (Industrial load chart) kg 2450 2450 2300 2200 2100 2000 1600 1300
Residual capacity with hooked-on side shift (Industrial load chart) kg 2500 2450 2350 2250 2150 2050 1650 1350
Height at max capacity mm 4000 4300 4000 4000 4000 4000 4000 4000
Height at max capacity with integrated sideshift mm 4000 4300 4000 4000 4000 4000 4000
ME 425C
Check out our used equipment ads